Skip to Main Content (Press Enter)

Logo UNIMORE
  • ×
  • Home
  • Degree programmes
  • Modules
  • Jobs
  • People
  • Research Outputs
  • Academic units
  • Third Mission
  • Projects
  • Skills

UNI-FIND
Logo UNIMORE

|

UNI-FIND

unimore.it
  • ×
  • Home
  • Degree programmes
  • Modules
  • Jobs
  • People
  • Research Outputs
  • Academic units
  • Third Mission
  • Projects
  • Skills
  1. Research Outputs

Plasma-sprayed glass-ceramic coatings on ceramic tiles: microstructure, chemical resistance and mechanical properties

Academic Article
Publication Date:
2005
Short description:
Plasma-sprayed glass-ceramic coatings on ceramic tiles: microstructure, chemical resistance and mechanical properties / Bolelli, Giovanni; Cannillo, Valeria; Lusvarghi, Luca; Manfredini, Tiziano; Siligardi, Cristina; C., Bartuli; A., Loreto; T., Valente. - In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. - ISSN 0955-2219. - STAMPA. - 25:11(2005), pp. 1835-1853. [10.1016/j.jeurceramsoc.2004.06.018]
abstract:
This article reports the characterisation and optimisation of glass-ceramic coatings plasina-sprayed on traditional ceramic substrates, dealing with microstructures, chemical resistance, and superficial mechanical properties. A CaO-ZrO2-SiO2 (CZS) frit, capable of complete crystallization after proper thermal treatment, has been employed: due to its refractory nature, its firing temperature in a traditional process would be unbearable for common substrates. The frit was plasma-sprayed onto ceramic tiles and a post-process thermal treatment has been developed in order to sinter and crystallize the coating, employing much lower temperatures than a traditional ceramic firing cycle. The microstructure of both as-sprayed and treated coatings has been evaluated with SEM and EDS, acid resistance tests have been performed. Vickers microhardness, superficial fracture toughness, deep abrasion resistance, elastic modulus and coating adhesion have been evaluated. Unglazed stoneware and an industrial glaze were also tested for comparison and an experiment was made to produce a CZS-based glaze to ascertain the inadequacy of traditional firing. As-sprayed coatings have a typical plasma-spraying defective microstructure, but a thermal treatment with 30´ isotherm at 850 degrees C plus 15´ isotherm at 1050 degrees C allows good densification, excellent adhesion and complete crystallization, with formation of wollastonite-2M and many small Ca2ZrSi4O12 grains. Thus, the coating outperforms stoneware by 50% in abrasion resistance, possessing higher fracture toughness, thanks to the continuous crack deflections due to the numerous crystals. Fracture toughness appears to be the property most correlated to abrasion resistance, because brittle fracture is the dominant abrasion mechanism. Hardness and elastic modulus reflect quite well the coating inner cohesion. Treated coatings porosity is lower than industrial glazes and stoneware.
Iris type:
Articolo su rivista
Keywords:
Plasma-spraying; Microstructure-final; Glass ceramics; Chemical properties; Wear resistance; Toughness and toughening; Tiles
List of contributors:
Bolelli, Giovanni; Cannillo, Valeria; Lusvarghi, Luca; Manfredini, Tiziano; Siligardi, Cristina; C., Bartuli; A., Loreto; T., Valente
Authors of the University:
BOLELLI Giovanni
CANNILLO Valeria
LUSVARGHI Luca
SILIGARDI Cristina
Handle:
https://iris.unimore.it/handle/11380/306409
Published in:
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Journal
  • Use of cookies

Powered by VIVO | Designed by Cineca | 26.4.5.0