Skip to Main Content (Press Enter)
×
Home
Corsi
Insegnamenti
Professioni
Persone
Pubblicazioni
Strutture
Terza Missione
Attività
Competenze
IT
EN
☰
UNI-FIND
|
UNI-FIND
unimore.it
IT
EN
×
Home
Corsi
Insegnamenti
Professioni
Persone
Pubblicazioni
Strutture
Terza Missione
Attività
Competenze
☰
Pubblicazioni
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Rivista
Codice:
E094338
ISSN:
0955-2219
Dati Generali
Dati Generali
Pubblicazioni (103)
Pulisci
Ordina Pubblicazioni:
ascendente
decrescente
A cracked infinite Kirchhoff plate supported by a two-parameter elastic foundation
Articolo
A lifetime prediction method based on Cumulative Flaw Length Theory
Articolo
A new glass-ceramic red pigment
Articolo
A non-destructive method to assess delamination of ceramic tiles
Articolo
Alkaline and alkaline-earth silicate glasses and glass-ceramics from municipal and industrial wastes
Articolo
Anisotropy of green stoneware evaluated by ultrasound measurements in combination with texture analyses
Articolo
Anodic aqueous electrophoretic deposition of titanium dioxide using carboxylic acids as dispersing agents
Articolo
Assessment of viscoelastic crack bridging toughening in refractory materials
Articolo
BAS, CMAS and CZAS glass coatings deposited by plasma spraying
Articolo
Bioactivity enhancement by a ball milling treatment in novel bioactive glass-hydroxyapatite composites produced by spark plasma sintering
Articolo
Bulk and sintered glass-ceramics by recycling municipal incinerator bottom ash
Articolo
Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements
Articolo
CMAS corrosion of YSZ thermal barrier coatings obtained by different thermal spray processes
Articolo
COLOR IN CERAMIC GLAZES: efficiency of the Kubelka-Munk Model in glazes with a black pigment and opacifier
Articolo
CRT glass state of the art. A case study: Recycling in ceramic glazes
Articolo
Cermodel 2013: Modelling and Simulation Meet Innovation in Ceramics Technology, July 10-12, 2013, Trento, Italy (Editorial)
Articolo
Cermodel 2015: Modelling and Simulation Meet Innovation in Ceramics Technology, July 1-3, 2015, Trento, Italy
Articolo
Cermodel 2017: Modelling and Simulation Meet Innovation in Ceramics Technology: July 26–28, 2017, Trento, Italy
Articolo
Characterisation of plasma-sprayed SrFe12O19 coatings for electromagnetic wave absorption
Articolo
Characterisation of the surface conductivity of glassy materials by means of impedance spectroscopy measurements
Articolo
Characterization of glass-alumina functionally graded coatings obtained by plasma spraying
Articolo
Characterization of vitreous enamel–steel interface by using hot stage ESEM and nano-indentation techniques
Articolo
Classical Bioglass® and innovative CaO-rich bioglass powders processed by Spark Plasma Sintering: A comparative study
Articolo
Color in ceramic glazes: analysis of pigments and opacifier grain size distribution effect by spectrophotometer
Articolo
Color matching algorithms in ceramic tile production
Articolo
Colouring of opaque ceramic glaze with zircon pigments: Formulation with simplified Kubelka–Munk model
Articolo
Comparing the deposition mechanisms in suspension plasma spray (SPS) and solution precursor plasma spray (SPPS) deposition of yttria-stabilised zirconia (YSZ)
Articolo
Control of pore size by metallic fibres in glass matrix composite foams produced by microwave heating
Articolo
DOE analyses on aqueous suspensions of TiO2 nanoparticles
Articolo
Densification of glass powders belonging to the CaO-ZrO2-SiO2 system by microwave heating
Articolo
Density of multicomponent silica-based potential bioglasses: Quantitative structure-property relationships (QSPR) analysis
Articolo
Deposition of bioactive glass coatings based on a novel composition containing strontium and magnesium
Articolo
Determination of the bonding strength in solid oxide fuel cells’ interfaces by Schwickerath crack initiation test
Articolo
Determination of thermal shock resistance in refractory materials by ultrasonic pulse velocity measurement
Articolo
Devitrification behaviour of plasma-sprayed glass coatings
Articolo
Different approaches to produce coatings with bioactive glasses: enameling vs plasma spraying
Articolo
Direct ink writing of silica-carbon-calcite composite scaffolds from a silicone resin and fillers
Articolo
Effect of rice husk ash (RHA) in the synthesis of (Pr,Zr)SiO4 ceramic pigment
Articolo
Effects of thermal aging on thermo-mechanical behavior of a glass sealant for solid oxide cell applications
Articolo
Electrophoretic deposition of multiferroic BiFeO3 sub-micrometric particles from stabilized suspensions
Articolo
Enhancing the mechanical properties of porcelain stoneware tiles: a microstructural approach
Articolo
From individual to equimolar binary transition metal diborides: The case of (Nb0.5M0.5)B2, M=Ti, Hf
Articolo
Functionalisation of ceramic tile surface by soluble salts addition: part I
Articolo
Functionalisation of ceramic tile surface by soluble salts addition: part II. Titanium and Silver addition
Articolo
Glass matrix composites from solid waste materials
Articolo
Glass-alumina functionally graded materials: their preparation and compositional profile evaluation
Articolo
Glass-ceramic Functionally Graded Materials produced with different methods
Articolo
Granite as flux in stoneware tile manufacturing
Articolo
Hydroxyapatite/bioactive glass functionally graded materials (FGM) for bone tissue engineering
Articolo
In vitro characterisation of plasma-sprayed apatite/wollastonite glass-ceramic biocoatings on titanium alloys
Articolo
Influence of body composition on the technological properties and mineralogy of stoneware: A DOE and mineralogical–microstructural study
Articolo
Influence of firing temperature on the color developed by a (Zr,V)SiO4 pigmented opaque ceramic glaze
Articolo
Influence of glass phase on Al2O3 fiber-reinforced Al2O3 composites processed by slip casting
Articolo
Influence of porosity on mechanical properties of tetragonal stabilized zirconia
Articolo
Innovative hydroxyapatite/bioactive glass composites processed by spark plasma sintering for bone tissue repair
Articolo
Insight into t->m transition of MW treated 3Y-PSZ ceramics by grazing incidence X-ray diffraction
Articolo
Interactive powder mixture concept for the preparation of geopolymers with fine porosity
Articolo
Mechanical activation of raw materials in the synthesis of Fe2O3-ZrSiO4 inclusion pigment
Articolo
Mechanism of lustre formation in scheelite-based glazes
Articolo
Microscale computational simulation and experimental measurement of thermal residual stresses in glass-alumina functionally graded materials
Articolo
Microstructural and in vitro characterisation of High-Velocity Suspension Flame Sprayed (HVSFS) bioactive glass coating
Articolo
Microstructural and mechanical changes by chemical ageing of glazed ceramic surfaces
Articolo
Microstructure-based modelling and experimental investigation of crack propagation in glass-alumina functionally graded materials
Articolo
Microwave assisted combustion synthesis in the system Ti-Si-C for the joining of SiC: Experimental and numerical simulation results
Articolo
Microwave processing of glass matrix composites containing controlled isolated porosity
Articolo
Mixture of deflocculants: A systematic approach
Articolo
Multitechnique approach to V-ZrSiO4 pigment characterization and synthesis optimization
Articolo
New ceramic materials from MSWI bottom ash obtained by an innovative microwave-assisted sintering process
Articolo
Optimal size distribution to obtain the densest packing: A different approach
Articolo
Plasma-sprayed glass-ceramic coatings on ceramic tiles: microstructure, chemical resistance and mechanical properties
Articolo
Plasma-sprayed graded ceramic coatings on refractory materials for improved chemical resistance
Articolo
Porcelain stoneware with pegmatite and nepheline syenite solid solutions: Pore size distribution and descriptive microstructure
Articolo
Post-deposition laser treatment of plasma sprayed titania-hydroxyapatite functionally graded coatings
Articolo
Post-treated incinerator bottom ash as alternative raw material for ceramic manufacturing
Articolo
Prediction of the elastic properties profile in glass-alumina functionally graded materials
Articolo
Preparation and experimental characterization of glass-alumina functionally graded materials
Articolo
Preparation of barium hexaferrite coatings using atmospheric plasma spraying
Articolo
Preparation of phosphoric acid-based geopolymer foams using limestone as pore forming agent - Thermal properties by in situ XRPD and Rietveld refinements
Articolo
Pressureless spark plasma–sintered Bioglass® 45S5 with enhanced mechanical properties and stress–induced new phase formation
Articolo
Production and characterization of plasma sprayed TiO2-hydroxyapatite functionally graded coatings
Articolo
Recent advances on innovative bioactive glass-hydroxyapatite composites for bone tissue applications: Processing, mechanical properties, and biological performance
Articolo
Recycling in ceramic glazes of zirconia overspray from thermal barrier coatings manufacturing
Articolo
Recycling of bottom ash from biomass combustion in porcelain stoneware tiles: Effects on technological properties, phase evolution and microstructure
Articolo
Recycling of microwave inertised asbestos containing waste in refractory materials
Articolo
Role of iron-rich clays on sintering of porcelain stoneware tiles
Articolo
SINTERING BEHAVIOR OF TAPE-CAST CMAS GLASS-CERAMIC REINFORCED WITH ALUMINA CHOPPED FIBERS
Articolo
Sintered sanidine glass-ceramics from industrial wastes
Articolo
Sintering mechanisms, phase transformations and microstructure of porcelain stoneware containing thermally inertized man-made vitreous fibres
Articolo
Solar reflective ink-jet printed porcelain stoneware tiles as an alternative for Urban Heat Island mitigation
Articolo
Spark plasma sintered CaO-rich bioglass-derived glass-ceramics with different crystallinity ratios: A detailed investigation of their behaviour during biological tests in SBF
Articolo
Spark plasma sintering, mechanical and in-vitro behavior of a novel Sr- and Mg-containing bioactive glass for biomedical applications
Articolo
Steel particles-porcelain stoneware composite tiles: an advanced experimental-computational approach
Articolo
Synthesis and characterization of bioactive glasses functionalized with Cu nanoparticles and organic molecules
Articolo
The effect of alkaline earth carbonates on the microstructure and mechanical properties of impermeable and lightweight ceramics
Articolo
The effects of carboxylic acids on the aqueous dispersion and electrophoretic deposition of ZrO2
Articolo
The effects of firing conditions on the properties of electrophoretically deposited titanium dioxide films on graphite substrates
Articolo
The role of sodium hexametaphosphate in the dissolution process of kaolinite and kaolin
Articolo
Thermal and chemical behaviour of different glasses containing steel fly ash and their transformation into glass-ceramics
Articolo
Thermal and physical characterisation of apatite/wollastonite bioactive glass-ceramics
Articolo
Thermal decomposition of asbestos and recycling in traditional ceramics
Articolo
Thermal spraying to coat traditional ceramic substrates: Case studies
Articolo
Utilisation of municipal incinerator grate slag for manufacturing porcelainized stoneware tiles manufacturing
Articolo
Vitrification of industrial and natural wastes with production of glass fibres
Articolo
No Results Found
«
‹
{pageNumber}
›
»
{startItem} - {endItem} di {itemsNumber}
5 per pagina
10 per pagina
30 per pagina
vedi tutti
